|
UG124 Datasheet, PDF (7/18 Pages) Silicon Laboratories – ZigBee Contact Sensor Reference Design Kit | |||
|
◁ |
UG124: ZigBee® Contact Sensor Reference Design (RD-0030-0201) Kit User's Guide
Overview
4.4 Feature List
EM3587 Device Features:
⢠32-bit ARM® Cortex®-M3 processor.
⢠2.4-GHz IEEE 802.15.4-2003 transceiver & lower MAC.
⢠AES-128 encryption accelerator.
⢠Flexible ADC, UART/SPI/I2C serial communications, and general purpose timers.
⢠Highly efficient Thumb-2 instruction set.
ZigBee Contact Sensor Reference Design Hardware Features:
⢠Integrated PCB antenna.
⢠Form C reed switch with PCB footprint options for form A and SOT-23 sensors.
⢠Silicon Labs Si7053 temperature sensor with ±0.3 ºC maximum accuracy.
⢠Pushbutton for network join.
⢠Network/status LED.
⢠Full packet trace port for RF communications debugging.
⢠Supports up to five years of operation on a CR2032 coin cell battery.
⢠2.1 V to 3.6 V operation.
⢠Fully qualified BOM for 0 to 55 ºC operation.
⢠Up to +8 dBm TX power.
⢠512 kB user programmable flash with 64 kB RAM.
⢠Pre-certified FCC Part 15.
ZigBee Contact Sensor Reference Design Firmware Features:
⢠Pre-compiled and source application firmware.
⢠Over-the-Air (OTA) upgradable.
⢠ZigBee HA 1.2 pre-certifiable clusters: basic, power configuration, identify, OTA upgrade, temperature measurement, IAS zone, di-
agnostics.
⢠Application firmware (source code) available in the EmberZNet⢠PRO stack library.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.4 | 6
|
▷ |