UG124 Datasheet, PDF (5/18 Pages) Silicon Laboratories – ZigBee Contact Sensor Reference Design Kit

4. Overview
UG124: ZigBee^® Contact Sensor Reference Design (RD-0030-0201) Kit User's Guide
Overview
4.1 Part Numbers
The part number convention is RD-XXXX-YYYY, where:
RD
Reference Design
XXXX
Reference Design Number
YYYY
Reference Design Component
This document will use the reference design number (RD-XXXX) when describing the complete design, and the reference design com-
ponent (RD-XXXX-YYYY) when describing a specific component.
The following table provides a description and PCB marking for each part number.
Note: Some cases lack sufficient space on the PCB, and an internal “IST” marking appears on the PCB instead of the “RD” part num-
ber.
Table 4.1. Part Numbers and Description
Part Number
RD-0030-0201
RD-0030-0101
PCB Marking
N/A
IST-A30 Rev 2.0
Description
ZigBee Contact Sensor Reference Design Kit with EM3587, Si7053, and
PCB Antenna.
ZigBee Contact Sensor Reference Design Evaluation Board with
EM3587, Si7053, and PCB Antenna.
4.2 ZigBee Contact Sensor Reference Design Kit
Kit Contents:
• ZigBee Contact Sensor Reference Design with CR2032 battery and battery tab.
• Standex / Meder M13 magnet enclosed in plastics with screw holes.
• Quick start card to obtain the latest reference design collateral.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.4 | 4