UG124 Datasheet, PDF (16/18 Pages) Silicon Laboratories – ZigBee Contact Sensor Reference Design Kit

UG124: ZigBee^® Contact Sensor Reference Design (RD-0030-0201) Kit User's Guide
Manufacturing Tests
9. Manufacturing Tests
This section describes how a user can develop a low-cost manufacturing test methodology in order to test products that utilize this ref-
erence design. Recommended test equipment and test procedures will also be outlined in this section.
9.1 Test Coverage
By following these guidelines, the following items will be tested and verified for functionality:
• RF TX/RX performance
• Current consumption
• Magnetic sense functionality
• Common ZigBee operations
• Frequency offset (with optional spectrum analyzer)
9.2 Test Equipment List
The test system is composed of the following components:
• Desktop PC
• RF Shielded Box
• Power Supply (Agilent E3646A + Ammeter)
• PoE Hub (Netgear Prosafe 108P)
• 2x ISA3 programming/packet trace adapters (Silicon Labs ISA3)
• Golden Node (Silicon Labs ZigBee coordinator device)
• Spectrum Analyzer (Agilent E4407B)
• Device Under Test (DUT)
9.3 Test System Diagram
PC
PoE Hub
Shielded Box
ISA3
ISA3
DUT
Golden Node
Power Supply
From PC
Magnet
Figure 9.1. Test System Diagram
Spectrum
Analyzer
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.4 | 15