SDBC-DK3UG Datasheet, PDF (44/76 Pages) Silicon Laboratories – 4 buttons and 4 LEDs for custom purposes

SDBC-DK3 UG
Set Packet Length Information
Set Register 0x3E
DO a Burst Write to FIFO
(<64 bytes)
Write Register 0x7F
( Write )
RF chip in
Transmit
Mode
Set Register 0x07
( 0x8701 )
Enable packet sent interrupt
Set Register 0x05
( 0x8504 )
DO a Burst Read from
FIFO
(<64 bytes)
Check packet for
validation
Yes
Blink LED to show
packet received
Register 0x7F
( Read )
No
Read out Interrupt Status
Registers
No
Wait for packet sent interrupt
While (RF_NIRQ_PIN == 1)
Yes
Read
Registers: 0x03, 0x04
Packet Sent Sucessful
Figure 61. Basic Program Structure Block Diagram (4 of 4)
44
Rev. 0.4