SDBC-DK3UG Datasheet, PDF (27/76 Pages) Silicon Laboratories – 4 buttons and 4 LEDs for custom purposes

7.2.3.2. Test Method
SDBC-DK3 UG
Figure 29. Setup Screen (1 of 4)
1. Ensure “Lab Mode” is selected as the operating function.
2. Select CW.
3. Press <GO> to move on from this screen.
Figure 30. Setup Screen (2 of 4)
1. Select the appropriate frequency.
When evaluating with CW, data rate and modulation have no effect.
2. Press <GO> to move on from this screen.
Rev. 0.4
27