SDBC-DK3UG Datasheet, PDF (31/76 Pages) Silicon Laboratories – 4 buttons and 4 LEDs for custom purposes

SDBC-DK3 UG
Figure 38. Setup Screen (2 of 4)
1. Select the appropriate frequency, data rate, and modulation.
2. Press <GO> to move on from this screen.
Figure 39. Setup Screen (3 of 4)
1. Select the desired output power.
2. Press <GO> to move on from this screen.
Figure 40. Setup Screen (4 of 4)
1. Parameters in Figure 40 are not relevant to PN9 evaluations. Silicon Labs recommends leaving them at their
default values.
2. Press <GO> to move on from this screen.
Rev. 0.4
31