SDBC-DK3UG Datasheet, PDF (22/76 Pages) Silicon Laboratories – 4 buttons and 4 LEDs for custom purposes

SDBC-DK3 UG
7.2. Lab Mode
The lab mode is intended for users who want to evaluate the performance of the Silicon Labs RFICs, supported
through the shipping factory firmware on the SDB platform.
Lab mode is intended so users can perform simple evaluations, such as:
 Transmitter Evaluation
Output power
Spectrum analysis
 Receiver Evaluation
BER Sensitivity
PER Sensitivity
Receiver parameters:
Automatic Frequency Control
Blocking
Selectivity
Using lab mode, users can independently evaluate transmit and receive performance. Table 5 lists the test cards
available for ordering.
Table 5. Test Cards Available for Ordering
Type
Transceivers
Matching Network
Configuration
High band
Low band
Part Number
4432 – DKDB1
4431 – DKDB1
4432 – DKDB5
4431 – DKDB5
Receivers
High band
Low band
4330 – DKDB1
4330 – DKDB5
Transmitters
High band
Low band
4032 – DKDB1
4031 – DKDB1
4032 – DKDB5
4031 – DKDB5
22
Rev. 0.4