SDBC-DK3UG Datasheet, PDF (1/76 Pages) Silicon Laboratories – 4 buttons and 4 LEDs for custom purposes

SDBC-DK3 UG
C8051F930 WIRELESS SOFTWARE DEVELOPMENT KIT USER’S GUIDE
1. Introduction
The Silicon Labs Wireless Product Software Development Board, MSC-DBSB8, is designed to help engineers
develop code for the Silicon Lab's EZRadio® and EZRadioPRO™ wireless products using the Silicon Labs
C8051F9xx microcontroller platform.
The C8051F9xx Wireless Software Development Board (MSC-DBSB8) is designed for code development. A
second platform, the WDS Loadboard, may also be purchased allowing for exhaustive RF lab based testing. The
Loadboard can be bought under the part number MSC-DKLB2 but also within the ISM-DK3 kit.
Figure 1. MSC-DBSB8
Software Development Board (SDB)
Figure 2. MSC-DBLB2 (Not Included)
Testing Platform for controlled Lab Tests
(Loadboard)
Both boards come with the Silicon Labs standard 40-pin socket for connecting standard EZRadio® and
EZRadioPRO™ evaluation testcards such as the Si4432-DKDB1. The onboard C8051F930 comes preloaded with
sample firmware to demonstrate a packet-based wireless link between two systems.
The MSC-DBSB8 C8051F9xx software development board includes:
 One 40-pin socket for EZRadio and EZRadioPRO testcards
 C8051F930 microcontroller preloaded with demonstration software
 Standard debug connector for Silicon Labs C8051 programming and debugging
 4 buttons and 4 LEDs for custom purposes
 LCD display for setup parameters and information display
 RS232 interface via a 9-pin DSUB male connector
 USB type B connector with Silicon Labs CP2102 USB > Serial Converter onboard
 On board 3.3 V PSU
 5 x 19 through hole breadboard area for customer's application
Rev. 0.4 8/09
Copyright © 2009 by Silicon Laboratories
SDBC-DK3 UG