LC89057W-VF4A-E Datasheet, PDF (38/59 Pages) Sanyo Semicon Device – Digital Audio Interface Transceiver

12.2.2 Details of write commands
LC89057W-VF4A-E
CCB address: 0xE8; Command address: 0; All system settings
DI7
DI6
DI5
DI4
DI3
DI2
DI1
DI0
0
0
0
0
0
0
CAU
CAL
DI15
TESTM
DI14
0
DI13
TXOPR
DI12
RXOPR
DI11
INTOPF
DI10
0
DI9
DOEN
DI8
SYSRST
SYSRST
System reset
0: Don't reset (initial value)
1: Reset circuits other than command registers
DOEN
INTOPF
DO pin output setting
0: Output (initial value)
1: Always high impedance state (read disabled)
______
INT pin output setting
0: Output "L" level during source occurrence (initial value)
1: Output "L" pulse during source occurrence
RXOPR
Setting of demodulation operation
0: Operate (initial value)
1: Stop
TXOPR
Setting of modulation operation
0: Stop (initial value)
1: Operate
TESTM
Test mode setting
0: Normal operation (initial value)
1: Enter test mode
• _{When reset by SYSRST is done or the demodulation is set to stop with RXOPR, RBCK and SBCK output "L", and}
RLRCK and SLRCK output "H".
No.7202-38/59