LC88F40H0PA Datasheet, PDF (25/32 Pages) Sanyo Semicon Device – For Car Audio Systems 16-bit ETR Microcontroller

LC88F40H0PA/H0PAU/F0PA/F0PAU/D0PA/D0PAU
Consumption Current Characteristics at Ta = -40°C to +85°C, VSS1 = VSS2 = VSS3 = VSS4 = 0V
Parameter
Symbol
Applicable Pin
/Remarks
Conditions
VDD[V]
min
Specification
typ
max
unit
Normal mode
consumption
current
(Note 7-1)
IDDOP(1)
IDDOP(2)
VDDCPU
=VDDPORT1
=VDDPORT2
=VDDPLL
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to VCO (12MHz)
• Internal RC oscillation stopped
• 1/1 frequency division mode
• FmX’tal=32.768kHz crystal oscillation mode
3.0 to 3.6
10
15
• System clock set to VCO (8MHz)
• Internal RC oscillation stopped
3.0 to 3.6
8
12
• 1/1 frequency division mode
mA
IDDOP(3)
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to VCO (4MHz)
• Internal RC oscillation stopped
3.0 to 3.6
6
9
• 1/1 frequency division mode
IDDOP(4)
• FmX’tal=0kHz (oscillation stopped)
• System clock set to internal RC oscillation
3.0 to 3.6
3.5
5
• 1/1 frequency division mode
IDDOP(5)
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to 32.768kHz
• Internal RC oscillation stopped
3.0 to 3.6
35
150 μA
• 1/1 frequency division mode
HALT mode
consumption
current
(Note 7-1)
IDDHALT(1)
VDDCPU
=VDDPORT1
=VDDPORT2
=VDDPLL
HALT mode
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to VCO (12MHz)
• Internal RC oscillation stopped
• 1/1 frequency division mode
3.0 to 3.6
3.5
5
IDDHALT(2)
HALT mode
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to VCO (8MHz)
3.0 to 3.6
2.5
4
• Internal RC oscillation stopped
• 1/1 frequency division mode
mA
IDDHALT(3)
HALT mode
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to VCO (4MHz)
3.0 to 3.6
1.5
3
• Internal RC oscillation stopped
• 1/1 frequency division mode
IDDHALT(4)
HALT mode
• FmX’tal=0kHz (oscillation stopped)
• System clock set to internal RC oscillation
3.0 to 3.6
0.2
1
• 1/1 frequency division mode
IDDHALT(5)
HALT mode
• FmX’tal=32.768kHz crystal oscillation mode
• System clock set to 32.768kHz
3.0 to 3.6
15
100
• Internal RC oscillation stopped
• 1/1 frequency division mode
HOLD mode
consumption
current
IDDHOLD(1) VDDCPU
HOLD mode
3.0 to 3.6
μA
1
30
HOLDX mode
consumption
current
IDDHOLD(2) VDDCPU
HOLDX mode
• FmX’tal=32.768kHz crystal oscillation mode
3.0 to 3.6
15
50
Note 7-1: The consumption current value includes none of the currents that flow into the output transistor and internal
pull-up resistors.
No.A1853-25/32