LV24010LP Datasheet, PDF (1/18 Pages) Sanyo Semicon Device – Bi-CMOS LSI Compact Portable Equipment 1-Chip FM+RDS Tuner IC

Ordering number : ENA0466
LV24010LP
Bi-CMOS LSI
Compact Portable Equipment
1-Chip FM+RDS Tuner IC
Overview
The LV24010LP is single-chip FM radio with RDS tuner IC that requires absolutely no external components. This design
was achieved by combining Sanyo BiCMOS process technology, Sanyo packaging technology, and filtering circuit
technology developed by Semiconductor Ideas to the Market (ItoM) B.V.
Functions
• FM FE.
• FM IF.
• MPX stereo decoder.
• Tuning.
• Standby.
• RDS.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Maximum supply voltage
Maximum input voltage
Allowable power dissipation
VCC max
VDD max
VIN1 max
VIN2 max
Pd max
Storage temperature
Tstg
Operating temperature
Topr
*: With 40 × 50× 0.8mm³, glass epoxy substrate
Conditions
Analog block supply voltage
Digital block supply voltage
Clock, Data, NR-W
Extenal_clk_in
Ta≤70°C *
Ratings
unit
5.0
V
4.5
V
VDD+0.3
V
VDD+0.3
V
140
mW
-40 to +125
°C
-20 to +70
°C
Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Recommended supply voltage
VCC
VDD
Analog block supply voltage
Digital block supply voltage
VCC _op
Operating supply voltage range
VDD _op
VIO _op
Interface voltage
Note: The application voltage of VIO to be used must be either equal to VDD or the VDD value or less (VIO ≤ VDD).
Ratings
unit
3.0
V
3.0
V
2.7 to 5.0
V
2.5 to 4.0
V
1.8 to 4.0
V
■ Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft’s control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
■ SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
N2206 MS PC 20060921-S00002 / 71306 MS OT 20060529-S00004 No.A0466-1/18