|
BU6569GVW Datasheet, PDF (8/17 Pages) Rohm – Camera Image Processor with ADPCM / MIDI / MP3 / AAC / HE-AAC Audio | |||
|
◁ |
BU6569GVW
Technical Note
PIN Land
No.
No.
PIN Name
In/Out
/Analog
Active
Level
Init
Function explanation
Power
source
system
Function
division
I/O type
104
A6 VDDIO4
-
PWR
-
PLL power supply (System 4)
4
-
-
105
B7 XIN1
In
CLK
In
Oscilator input1 *10
4
CLK
E,G*11
106
B6 XOUT1
107
A5 PLL_FILTER
Out
CLK
High Oscilator output1
4
CLK
E
Analog
-
Be sure to connect a 2200-μF bypass capacitor
-
between PLL_FILTER and VSS4.
4
CLK
K
108
C6 XIN2
In
CLK
In
Oscilator input2 *10
4
CLK
E,G *11
109
D6 XOUT2
Out
CLK
High Oscilator output2
4
CLK
E
110
E6 VSS4
-
GND
-
PLL ground
4
-
-
111
A4 VDDIO1
-
PWR
-
Digital I/O power supply (System 1)
1
-
-
112
B5 A2
In
DATA
In
Host address bus: bit 2
1
HOST
D*8
113
B3 A1
In
DATA
In
Host address bus: bit 1
1
HOST
D*8
114
C5 D15
In/Out
DATA
In *1 Host data bus: bit 15
1
HOST
D*2
115
D5 D14
In/Out
DATA
In *1 Host data bus: bit 14
1
HOST
D*2
116
A3 D13
In/Out
DATA
In *1 Host data bus: bit 13
1
HOST
D*2
117
B4 D12
In/Out
DATA
In *1 Host data bus: bit 12
1
HOST
D*2
118
C4 D11
In/Out
DATA
In *1 Host data bus: bit 11
1
HOST
D*2
119
D4 D10
In/Out
DATA
In *1 Host data bus: bit 10
1
HOST
D*2
120
A2 D9
In/Out
DATA
In *1 Host data bus: bit 9
1
HOST
D*2
In the function division column, âHOSTâ stands for HOST IF, âSYSâï®SYSTEM, âCAMâï®CAMERA IF, âLCDâï®LCD IF, âAUDâï®Audio IF, âSDâï®SD Card IF,
âFLâï®NAND Flash IF, âTVâï®TV Encoder IF, âUSBâï®USB IF, and âCLKâï®OSC&PLL.
In the power source system column, â1â stands for system 1 (VDDIO1), â2â for system 2 (VDDIO2), â3â for system 3 (VDDIO3), â4â for system 4 (VDDIO4), âAâ for
system 5 (ADD).
âï¼â in Active level column means active level can be changed by setting of register.
Init column is a pin state at the time of reset release.
*1 : RESETB=âLâ
*2 : Pull-down only a test mode.
*3 : Suspend only a test mode.
*4 : Suspend or input only a test mode.
*5 : Suspend or Pull-down only a test mode.
*6 : Suspend, Pull-down or output function only a test mode.
*7 : Suspend, Pull-down or input function only a test mode.
*8 : Output or pull-down only a test mode.
*9 : Pull-down during CAMOFF mode.
*10 : The crystal oscillation circuit does not include a return resistance, so it is needed to examine an external circuit including return resistance.
*11 : I/O type is E at oscillation mode, it is G at external clock input mode.
*12 : When not during playback, the potential approximates Vref. Hi-Z at reset.
*13 : When disable reset, standby, anout_disable or mono_disable, pop noise occurs.
*14 : This pin outputs inverted signal of (R + L) / 2, If âmonaural modeâ is not selected. And outputs differential signal with L_OUT, If âmonaural modeâ is selected.
âEquivalent Circuit Structures of input / output pins
Type
Equivalent circuit structure
VDDIO
VDDIO
Internal signal
Type
Equivalent circuit structure
VDDIO
A
GND
GND
PULL-DOWN input terminal
To internal
GND
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
B
GND
Hysteresis input terminal
8/16
To internal
2009.07 - Rev.A
|
▷ |