HD404358 Datasheet, PDF (96/102 Pages) Renesas Technology Corp – microcomputer has an A/D converter,

HD404358 Series
Notes: 1. The oscillation stabilization time is the period required for the oscillator to stabilize in the
following situations:
a. After V_CC reaches 2.7 V at power-on.
b. After RESET input goes low when stop mode is cancelled.
c. After STOPC input goes low when stop mode is cancelled.
To ensure the oscillation stabilization time at power-on or when stop mode is cancelled, RESET
or STOPC must be input for at least a duration of t_RC.
When using a crystal or ceramic oscillator, consult with the manufacturer to determine what
stabilization time is required, since it will depend on the circuit constants and stray capacitance.
2. Refer to figure 77.
3. Refer to figure 78.
4. Refer to figure 79.
5. Refer to figure 80.
6. Applies to the HD40A4354, HD40A4356, HD40A4358.
7. Applies to the HD407A4359.
94