HD404344R Datasheet, PDF (94/102 Pages) Renesas Technology Corp – 4-bit microcomputer has an A/D converter

HD404344R Series/HD404394 Series
AC Characteristics (HD404344R, HD404342R, HD404341R, HD40C4344R, HD40C4342R,
HD40C4341R: V_CC = 2.5 to 5.5 V, GND = 0 V, T_a = –20 to +75°C, HCD404344R, HCD40C4344R:
V_CC = 2.5 to 5.5 V, GND = 0 V, T_a = +75°C, HD404394, HD404392, HD404391, HD4074344,
HD4074394: V_CC = 2.7 to 5.5 V, GND = 0 V, T_a = –20 to +75°C, unless otherwise specified) (cont)
Item
Symbol Pins
Min Typ Max Unit Test Condition Note
Input capacitance
C_in
All input pins
— — 15 pF f = 1 MHz,
except TEST,
V_in = 0 V
V_ref and R1₀–R1₂
TEST
— — 15 pF f = 1 MHz,
6
V_in = 0 V
— — 40 pF
7
V_ref
— — 30 pF
8
R1₀–R1₂
— — 15 pF
9
— — 30 pF
10
Notes: 1. The oscillation stabilization time is the period required for the oscillator to stabilize in the
following situations:
a. After V_CC reaches the minimum specification value at power-on.
b. After RESET input goes low when stop mode is cancelled.
c. After STOPC input goes low when stop mode is cancelled.
To ensure the oscillation stabilization time at power-on or when stop mode is cancelled, RESET
or STOPC must be input for at least a duration of t_RC.
When using a ceramic oscillator, consult with the manufacturer to determine what stabilization
time is required, since it will depend on the circuit constants and stray capacitance.
2. Refer to figure 66.
3. Refer to figure 67.
4. Refer to figure 68.
5. Refer to figure 69.
6. Applies to the HD404341R, HD404342R, HD404344R, HD404391, HD404392, and HD404394.
7. Applies to the HD4074344 and HD4074394.
8. Applies to the HD404394 series.
9. Applies to the HD404344R series.
10. Applies to the HD404394 series and HD4074344.
11. Applies to the HD40C4344R, HD40C4342R, HD404341R
92