H8S2199R Datasheet, PDF (873/1222 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2100 Series

Row 1
Row 2
1st
2nd
character character
D800 D802
D840 D842
3rd
4th
character character
D804 D806
D844 D846
Section 29 On-Screen Display (OSD)
32nd
character
D83E
D87E
Row 11
Row 12
DA80 DA82 DA84 DA86
DAC0 DAC2 DAC4 DAC6
DABE
DAFE
Note: D800 to DAFE indicate the lower 16 bits of addresses in the on-screen display RAM.
Figure 29.4 Correspondence between Display Data RAM and On-Screen Display
29.3 Settings in Character Units
The following items can be set in character units by using the display data RAM.
29.3.1 Character Configuration
Characters can be set freely by writing, to the display data RAM, the character data ROM address
(character code) at which the character to be displayed is stored.
For explanations of the character data ROM and display data RAM, refer to section 29.3.6,
Character Data ROM (OSDROM), and section 29.3.7, Display Data RAM (OSDRAM).
29.3.2 Character Colors
Character colors in text display mode can be set in character units through the character color
specification bit in display data RAM.
Table 29.4 shows the correspondence between character color code settings and color output
signals.
For details on display data RAM, refer to section 29.3.7, Display Data RAM (OSDRAM).
In the SECAM TV format, only black and white can be used in text display mode, and in
superimposed mode characters are white, with a faint background color.
Rev.2.00 Jan. 15, 2007 page 829 of 1174
REJ09B0329-0200