|
HD64F2329BVTE25V Datasheet, PDF (849/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents | |||
|
◁ |
Section 19 Power-Down Modes
Oscillator
RES
STBY
Oscillation
stabilization
time
Figure 19.3 Hardware Standby Mode Timing
Reset
exception
handling
19.8 Ï Clock Output Disabling Function
Output of the Ï clock can be controlled by means of the PSTOP bit in SCKCR, and DDR for the
corresponding port. When the PSTOP bit is set to 1, the Ï clock stops at the end of the bus cycle,
and Ï output goes high. Ï clock output is enabled when the PSTOP bit is cleared to 0. When DDR
for the corresponding port is cleared to 0, Ï clock output is disabled and input port mode is set.
Table 19.5 shows the state of the Ï pin in each processing state.
Table 19.5 Ï Pin State in Each Processing State
DDR
PSTOP
Hardware standby mode
Software standby mode
Sleep mode
Normal operating state
0
â
High impedance
High impedance
High impedance
High impedance
1
0
High impedance
Fixed high
Ï output
Ï output
1
1
High impedance
Fixed high
Fixed high
Fixed high
Rev.7.00 Feb. 14, 2007 page 815 of 1108
REJ09B0089-0700
|
▷ |