H8S-2214 Datasheet, PDF (8/936 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family H8S-2100 Series

Item
2.6.1 Overview
Table 2.1
Instruction
Classification
Page
34
2.6.2 Instructions 35
and Addressing
Modes
Table 2.2
Combinations of
Instructions and
Addressing Modes
2.6.3 Table of
38
Instructions
Classified by
Function
Table 2.3
Instructions
Classified by
40
Function
46
Revisions (See Manual for Details)
Note added
Function
Data transfer
Instructions
MOV
POP^*1, PUSH^*1
LDM*⁵, STM*⁵
MOVFPE, MOVTPE^*3
Size
BWL
WL
L
B
Types
5
Notes : 5. The STM/LDM instructions may only be used with the
ER0 to ER6 registers.
Note added
Function Instruction
Data
transfer
MOV
POP, PUSH
LDM^*3, STM^*3
MOVFPE^*1,
MOVTPE^*1
Notes : 3. The STM/LDM instructions may only be used with the
ER0 to ER6 registers.
Note added
Type
Instruction
Data transfer LDM^*2
STM^*2
Size^*1
L
L
Function
@SP+ → Rn (register list)
Pops two or more general registers from the stack.
Rn (register list) → @–SP
Pushes two or more general registers onto the stack.
Note amended
Type
Arithmetic
operations
Instruction
TAS^*3
Size^*1
B
Function
@ERd – 0, 1 → (<bit 7> of @ERd)
Tests memory contents, and sets the most significant bit
(bit 7) to 1.
Note added
Notes : 2. The STM/LDM instructions may only be used with the
ER0 to ER6 registers.
3. This instruction should be used with the ER0, ER1,
ER4, or ER5 general register only.
Rev.4.00 Sep. 18, 2008 Page viii of lx
REJ09B0189-0400