English
Language : 

M16C6C_15 Datasheet, PDF (3/100 Pages) Renesas Technology Corp – RENESAS MCU
M16C/6C Group
1. Overview
Table 1.2 Specifications (2/2)
Item
Function
Timer A
Timers
Timer B
Three-phase motor control
timer functions
Real-time clock
Timer S (Input capture/output
compare)
Serial
Interface
UART0 to UART5
Multi-master I2C-bus Interface
USB Functions
A/D Converter
D/A Converter
CRC Calculator
Flash Memory
Debug Functions
Operation Frequency/Supply Voltage
Current Consumption
Operating Temperature
Package
Description
16-bit timer × 5
Timer mode, event counter mode, one-shot timer mode, pulse width
modulation (PWM) mode
Event counter two-phase pulse signal processing (two-phase encoder
input) × 3
Programmable output mode × 3
16-bit timer × 6
Timer mode, event counter mode, pulse period measurement mode,
pulse width measurement mode
• Three-phase inverter control (timer A1, timer A2, timer A4, timer B2)
• On-chip dead time timer
Count: seconds, minutes, hours, days of the week
• Input base timer: 16 bits X 1
• I/O: 8 channels
• Time measurement register, Waveform generation register: 16 bits X
8
Clock synchronous/asynchronous × 6 channels
I2C-bus, IEBus, special mode 2
SIM (UART2)
1 channel
• Full speed (12 Mbps, USB 2.0 compliant)
• Transfer type: Control IN/OUT, Bulk IN x 2, Bulk OUT x 2, Interrupt IN
x2
• FIFO size: 584 bytes
• Setup 8 bytes
• Control IN 16 bytes
• Control OUT 16 bytes
• Interrupt IN 16 bytes: 2 channels
• Bulk IN 64 bytes x 2: 2 channels
• Bulk OUT 64 bytes x 2: 2 channels
10-bit resolution × 26 channels (2 circuits), including sample and hold
function
Conversion time: 1.72 µs
8-bit resolution × 2 circuits
CRC-CCITT (X16 + X12 + X5 + 1),
CRC-16 (X16 + X15 + X2 + 1) compliant
• Program and erase power supply voltage: 2.7 to 5.5 V
• Program and erase cycles: 1,000 times (program ROM 1, program
ROM 2), 10,000 times (data flash)
• Program security: ROM code protect, ID code check
On-chip debug, on-board flash rewrite, address match interrupt × 4
32 MHz/VCC1 = 2.7 to 5.5 V, VCC2 = 2.7 V to VCC1
Described in Electrical Characteristics
-20°C to 85°C, -40°C to 85°C (1)
100-pin QFP: PRQP0100JD-B (Previous package code: 100P6F-A)
100-pin LQFP: PLQP0100KB-A (Previous package code: 100P6Q-A)
Notes:
1. See Table 1.3 “Product List” for the operating temperature.
R01DS0034EJ0210 Rev.2.10
Jul 31, 2012
Page 3 of 96