M16C62 Datasheet, PDF (163/231 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics (Vcc = 3V)
Mitsubishi microcomputers
M16C / 62 Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
VCC = 3V
Table 1.20.18. Electrical characteristics (referenced to VCC = 3V, VSS = 0V at Ta = 25^oC, f(XIN) =
7MHz(Note 1) with wait)
Symbol
Parameter
Measuring condition
P00 to P07, P20 to P27, P30 to P37,
VOH
HIGH output P40 to P43, P50 to P57, P60 to P67,
voltage
P76, P77, P80 to P84, P86, P87,
P90, P92 to P97, P100 to P107
IOH=–1mA
VOH
HIGH output _XOUT
voltage
HIGHPOWER
LOWPOWER
IOH=–0.1mA
IOH=–50µA
HIGH output _XCOUT
voltage
HIGHPOWER
LOWPOWER
With no load applied
With no load applied
Standard
Min. Typ. Max. ^Unit
2.5
V
2.5
2.5
V
3.0
V
1.6
P00 to P07, P20 to P27, P30 to P37,
VOL
LOW output ^{P40 to P43, P50 to P57, P60 to P67,}
IOL=1mA
voltage
P70, P71, P76, P77, P80 to P84, P86,
P87, P90, P92 to P97, P100 to P107
VOL
LOW output _XOUT
voltage
HIGHPOWER
LOWPOWER
IOL=0.1mA
IOL=50µA
0.5 V
0.5
0.5 ^V
VT+-VT-
VT+-VT-
II H
Hysteresis
Hysteresis
HIGH input
current
TA0IN, TA3IN, TA4IN,
TB0IN, TB2IN to TB5IN, INT0 to INT2,
ADTRG,CTS0,CTS1 CLK0,CLK1,CLK3,
CLK4, TA3OUT, TA4OUT, NMI, KI0 to KI3,
SIN4, RXD0 to RXD2
RESET
P00 to P07, P20 to P27, P30 to P37,
P40 to P43, P50 to P57, P60 to P67,
P70, P71, P76, P77, P80 to P87,
P90, P92 to P97, P100 to P107,
XIN, RESET, CNVss (BYTE)
VI=3V
0.2
0.8 V
0.2
1.8 V
4.0 µA
I IL
RfXIN
RfCXIN
VR A M
Icc
LOW input
current
P00 to P07, P20 to P27, P30 to P37,
P40 to P43, P50 to P57, P60 to P67,
P70, P71, P76, P77, P80 to P87,
P90, P92 to P97, P100 to P107,
XIN, RESET, CNVss (BYTE)
VI=0V
Feedback resistance XIN
Feedback resistance ^XCIN
RAM retention voltage
When clock is stopped
The output pins EPROM,One-time PROM
are open and versions
other pins are
VSS
Mask ROM version
f(XIN)=7MHz
Square wave, no division
f(XIN)=10MHz
Square wave, no division
Flash memory 5V version ^f(XIN)=10MHz
Square wave, no division
EPROM,One-time PROM, f(XCIN)=32kHz
mask ROM versions
Square wave
Flash memory 5V version ^{f(XCIN)=32kHz}
Square wave, in RAM
Power supply current
f(XCIN)=32kHz
Flash memory 5V version _{Square wave, in flash}
memory
f(XCIN)=32kHz
When a WAITinstruction
is executed.
Oscillation capacity High
(Note2)
f(XCIN)=32kHz
When a WAIT instruction
is executed.
Oscillation capacity Low
(Note2)
Ta=25°C
when clock is stopped
Ta=85°C
when clock is stopped
–4.0 µA
3.0
MΩ
10.0
MΩ
2.0
V
6.0 15.0 mA
8.5 21.25 mA
13.5 21.25 mA
40.0
µA
40.0
µA
4.5
mA
2.8
µA
0.9
µA
1.0
µA
20.0
Note 1: 10 MHZ for the mask ROM version and flash memory version.
Note 2: With one timer operated using fC32.
162