M16C62 Datasheet, PDF (156/231 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics (Vcc = 5V)
Mitsubishi microcomputers
M16C / 62 Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 1.20.2. Recommended operating conditions (referenced to VCC = 2.7V to 5.5V at Ta = – 20 to
85^oC / – 40 to 85^oC(Note3) unless otherwise specified)
Symbol
Vcc
AVcc
Vss
Supply voltage
Analog supply voltage
Supply voltage
Parameter
Standard
Min.
Typ.
Max.
Unit
2.7
5.0
5.5
V
Vcc
V
0
V
AVss
VIH
Analog supply voltage
HIGH input
voltage
P00 to P07, P20 to P27,
P30 to P37, P40 to P43, P50 to P57, P60 to P67,
P76, P77, P80 to P87,P90, P92 to P97, P100 to P107,
XIN, RESET, CNVSS (BYTE)
0.8Vcc
P70 , P71
0.8Vcc
LOW input _{P00 to P07, P20 to P27, P30 to P37,}
VIL
voltage
P40 to P43, P50 to P57, P60 to P67, P70, P71,P76, P77,
P80 to P87, P90, P92 to P97, P100 to P107,
0
XIN, RESET, CNVSS (BYTE)
HIGH peak output
I _{OH (peak)} ^current
P00 to P07, P20 to P27,P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P76, P77,
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
HIGH average output ^{P00 to P07, P20 to P27, P30 to P37,}
I _{OH (avg)} current
P40 to P43, P50 to P57, P60 to P67, P76, P77,
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
LOW peak output
I _{OL (peak)} current
P00 to P07, P20 to P27,P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71, P76, P77
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
LOW average
I_{OL (avg)} output current
P00 to P07, P20 to P27,P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71, P76, P77
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
f (XIN)
Main clock input
oscillation
frequency
No wait
EPROM,
Vcc=4.5V to 5.5V 0
One time PROM
versions
Vcc=2.7V to 4.5V ₀
Mask ROM,
Flash memory 5V
version (Note5)
Vcc=4.2V to 5.5V 0
Vcc=2.7V to 4.2V 0
EPROM,
Vcc=4.5V to 5.5V 0
One time PROM
versions
Vcc=2.7V to 4.5V 0
with wait
Mask ROM,
Flash memory 5V
version (Note5)
Vcc=4.2V to 5.5V 0
Vcc=2.7V to 4.2V 0
f (XcIN) Subclock oscillation frequency
0
V
Vcc
V
6.5
V
0.2Vcc V
–10.0 mA
–5.0
mA
10.
mA
0
32.768
5.
mA
0
16 ^MHz
6.95 X Vcc
–15.275
MHz
16 MHz
7.33 X Vcc
–14.791
MHz
16 MHz
5 X Vcc
–6.5
MHz
16 MHz
4 X Vcc
–0.8
MHz
50 kHz
Note 1: The mean output current is the mean value within 100ms.
Note 2: The total IOL (peak) for all ports must be 80mA max. The total IOH (peak) for all ports must be 80mA max.
Note 3: Specify a product of –40 to 85°C to use it.
Note 4: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency
(EPROM, One-time PROM, No wait)
Main clock input oscillation frequency
(Mask ROM, No wait)
Main clock input oscillation frequency
(EPROM, One-time PROM, With wait)
Main clock input oscillation frequency
(Mask ROM, With wait)
16.0
6.95 X VCC - 15.275MHZ
16.0
7.33 X VCC - 14.791MHZ
16.0
5 X VCC - 6.5MHZ
16.0
4 X VCC - 0.8MHZ
10.0
7.0
5.0
3.5
0.0
2.7
4.5
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.5 5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
Note 5: Execute case without wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 6.25 MHz.
Execute case with wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 12.5 MHz.
155