M16C62 Datasheet, PDF (15/231 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Reset
Mitsubishi microcomputers
M16C / 62 Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Reset
There are two kinds of resets; hardware and software. In both cases, operation is the same after the reset.
(See “Software Reset” for details of software resets.) This section explains on hardware resets.
When the supply voltage is in the range where operation is guaranteed, a reset is effected by holding the
reset pin level “L” (0.2VCC max.) for at least 20 cycles. When the reset pin level is then returned to the “H”
level while main clock is stable, the reset status is cancelled and program execution resumes from the
address in the reset vector table.
Figure 1.6.1 shows the example reset circuit. Figure 1.6.2 shows the reset sequence.
RESET
VCC
5V
VCC
0V
5V
RESET
0V
Example when VCC = 5V.
4.0V
0.8V
Figure 1.6.1. Example reset circuit
XIN
Single chip
mode
RESET
BCLK
Address
More than 20 cycles are needed
BCLK 24cycles
FFFFC16
Content of reset vector
FFFFE16
Figure 1.6.2. Reset sequence
14