M16C30L Datasheet, PDF (148/166 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics
Mitsubishi microcomputers
M16C / 30L Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 1.26.2. Recommended operating conditions (referenced to VCC = 2.2V to 3.6V at Topr = – 20°C
to 85^oC / – 40°C to 85^oC(Note 3) unless otherwise specified)
Symbol
Parameter
Vcc
Supply voltage
AVcc Analog supply voltage
Vss
Supply voltage
AVss Analog supply voltage
HIGH input ^{P31 to P37, P40 to P47, P50 to P57, P60 to P67,}
VIH
voltage
P72 to P77, P80 to P87, P90 to P97, P100 to P107,
XIN, RESET, CNVSS, BYTE
P70, P71
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
LOW input
voltage
P31 to P37, P40 to P47, P50 to P57, P60 to P67,
P70 to P77, P80 to P87, P90 to P97, P100 to P107,
VIL
XIN, RESET, CNVSS, BYTE
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
HIGH peak output
I OH (peak) _current
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P72 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
I OH (avg)
HIGH average output ^{P00 to P07, P10 to P17, P20 to P27, P30 to P37,}
current
P40 to P47, P50 to P57, P60 to P67, P72 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
LOW peak output
I OL (peak) _current
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P70 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
LOW average
I OL (avg) _{output current}
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P70 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
Vcc=3.0V to 3.6V
f (XIN)
Main clock input
oscillation frequency
(Note 4)
No wait
With wait
Vcc=2.4V to 3.0V
Vcc=2.2V to 2.4V
Vcc=3.0V to 3.6V
Vcc=2.4V to 3.0V
Vcc=2.2V to 2.4V
f (XcIN) Subclock oscillation frequency
Min.
2.2
Standard
Typ.
3.3
Vcc
0
0
Max.
3.6
0.8Vcc
Vcc
0.8Vcc
4.2
0.8Vcc
Vcc
0.5Vcc
Vcc
Unit
V
V
V
V
V
V
V
V
0
0.2Vcc
V
0
0.2Vcc
V
0
0.16Vcc
V
- 10.0
mA
- 5.0
mA
10.0
mA
5.0
mA
0
16
MHz
0
15 X Vcc
- 29
MHz
0
17.5 X Vcc
- 35
MHz
0
16
MHz
0
11.25 X Vcc
- 17.75
MHz
0
11.25 X Vcc
- 17.75
MHz
32.768
50
kHz
Note 1: The mean output current is the mean value within 100ms.
Note 2: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOH (peak) for ports P0, P1,
P2, P86, P87, P9, and P10 must be 80mA max. The total IOL (peak) for ports P3, P4, P5, P6, P7, and P80 to P84 must be
80mA max. The total IOH (peak) for ports P3, P4, P5, P6, P72 to P77, and P80 to P84 must be 80mA max.
Note 3: Specify a product of -40°C to 85°C to use it.
Note 4: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency (No wait)
Main clock input oscillation frequency (With wait)
16.0
15 X VCC –29MHZ
17.5 X VCC–35MHZ
7.0
3.5
0.0
2.2 2.4
3.0
3.6
Supply voltage[V]
(BCLK: no division)
16.0
11.25 X VCC –17.75MHZ
9.25
7.0
0.0
2.2 2.4
3.0
3.6
Supply voltage[V]
(BCLK: no division)
147