7751 Datasheet, PDF (133/540 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER

TIMER B
6.2 Block description
6.2.2 Count start register
This register is used to start and stop counting. Each bit of this register corresponds each timer.
Figure 6.2.2 shows the structure of the count start register.
b7 b6 b5 b4 b3 b2 b1 b0
Count start register (Address 4016)
Bit
Bit name
0 Timer A0 count start bit
1 Timer A1 count start bit
2 Timer A2 count start bit
3 Timer A3 count start bit
4 Timer A4 count start bit
5 _{Timer B0 count start bit}
6 Timer B1 count start bit
7 Timer B2 count start bit
Functions
0 : Stop counting
1 : Start counting
: Bits 0 to 4 are not used for Timer B.
Fig. 6.2.2 Structure of count start register
At reset RW
0 RW
0 RW
0 RW
0 RW
0 RW
0 RW
0 RW
0 RW
6–4
7751 Group User’s Manual