AN91162 Datasheet, PDF (8/43 Pages) Ramtron International Corporation – Creating a BLE Custom Profile

Creating a BLE Custom Profile
Create a PSoC Creator Project
1. Open PSoC Creator from Start > All Programs > Cypress > PSoC Creator 3.2 > PSoC Creator 3.2.
2. Create a new project (File > New > Project). Select the PSoC 4100 BLE / PSoC 4200 BLE Design template and select
CY8C4247LQI-BL483 as the device. Name the project AN91162 and save the workspace at your desired location.
Note: CY8C4XX7-BL parts have 128K FLASH and 16K SRAM. Select CY8C4XX8-BL part if using PSoC 4 BLE device
with 256K FLASH and 32K SRAM.
Configure Components
1. Drag and drop a BLE Component from the Component Catalog (on the right-hand side of the PSoC Creator IDE) onto
Top Design, as shown in Figure 9:
Figure 9. BLE Component in Component Catalog
2. Double-click the Component to open its configuration window. Change the instance name of the Component to BLE
as shown in Figure 10:
www.cypress.com
Document No. 001-91162 Rev. *A
8