AN91162 Datasheet, PDF (21/43 Pages) Ramtron International Corporation – Creating a BLE Custom Profile

Figure 28. Open Project’s CYDWR
Creating a BLE Custom Profile
2. On the Pins tab, configure the pin numbers for each Component as shown in Figure 29. You can use the drop-down
menu, enter the port name (for example, P3[7]), or drag the pin name to the desired location in the figure to assign the
ports.
Figure 29. Pins Configuration in CYDWR
3. On the Clocks tab, double-click on the IMO clock to open the System Clocks configuration window, as shown in Figure
30.
www.cypress.com
Document No. 001-91162 Rev. *A
21