AN91162 Datasheet, PDF (15/43 Pages) Ramtron International Corporation – Creating a BLE Custom Profile

Creating a BLE Custom Profile
Parameter
Filter policy
Value
Scan request: Any
Connect request: Any
Advertising channel
Map
All channels
Fast advertising interval: 80 ms
Minimum (ms)
Fast advertising interval: 100 ms
Maximum (ms)
Fast advertising interval: 60 s
Timeout (s)
Slow advertising interval Uncheck
Description
Sets the Peripheral to choose whether to receive scan and connect requests from a
particular device or any Central device. In this project, it is set to receive requests from
any Central device for both scan requests and connection requests.
Sets the Peripheral to advertise in all three advertising channels (37, 38, and 39).
Specifies the minimum interval for advertising data. Actual advertising interval is
calculated using both minimum and maximum intervals.
Specifies the maximum interval for advertising data. Actual advertising interval is
calculated using both minimum and maximum intervals.
Specifies the time for which the Peripheral device will continue advertising before
timing out and ceasing to advertise further.
Disables slow advertising.
If this setting is enabled, the Peripheral device will go into the slow advertising mode
after a fast advertising timeout. In the slow advertising mode, the interval between
advertisements is longer but saves power during advertisement. This project does not
use this feature.
3. Click Advertisement packet under Peripheral role settings to specify the information in advertisement packets that
Central devices receives. For this project, select the complete Local name to be sent as part of advertisement packet, as
shown in Figure 20.
Figure 20. Advertisement Packet Settings
4. Click Scan response packet under Peripheral role to specify the data that the Peripheral should send in response to
requests from Central devices during scanning. For this project, select the Service UUID > RGB LED service data as
shown in Figure 21, and click Apply.
www.cypress.com
Document No. 001-91162 Rev. *A
15