AN91162 Datasheet, PDF (14/43 Pages) Ramtron International Corporation – Creating a BLE Custom Profile

Creating a BLE Custom Profile
Figure 19. Characteristic User Description for RGB LED Characteristic
Configure the BLE Peripheral
1. On the GAP Settings tab in the BLE Component configuration window, configure the parameters under General settings
per Table 2, and then click Apply.
Table 2. General GAP Settings for the Peripheral Device
Parameter
Public Address
Value
00A050-XXXXXX
Silicon generated “Company
assigned” part of device
address
Device Name
Appearance
MTU size (bytes)
Checked
CY Custom BLE
Unknown
23 (default)
Adv/San TX Power level
(dBm)
Connetion TX power level
(dBm)
0 (default)
0 (default)
Description
Specifies the 6-byte Bluetooth device address. This address is used during advertising.
The last three bytes of the address are silicon-generated if the Silicon generated option
is selected. This must be a non-zero value per the BLE SIG.
Note that 00A050 is the Company ID of Cypress Semiconductor.
Allows the company-assigned part of the public address to be generated from the
silicon. With this setting, each device will have a unique public address.
Specifies the name of the device that you want the GATT client to see while scanning.
Specifies the appearance of the device. For this custom service, leave it as Unknown.
Specifies the size of the protocol data unit (PDU) that can be transferred on the attribute
level.
Specifies the radio TX power level while advertising data.
Specifies the radio TX power level while sending data during connection.
2. Click Advertisement settings under Peripheral role and configure the parameters per Table 3, and click Apply.
Table 3. Advertisement Settings Configuration
Parameter
Discovery Mode
Advertising type
Value
General
Connectable undirected
advertising
Description
Sets the device to advertise in general mode so that it can be found by any Central
device.
Sets the Peripheral to advertise without any preference for a Central device and to
receive connection requests from any Central device scanning it.
www.cypress.com
Document No. 001-91162 Rev. *A
14