PISA11.CLASS2 Datasheet, PDF (17/19 Pages) PULS GmbH – PROTECTION MODULE 24V, 4 OUTPUTS

PISA11-Series
PISA11.CLASS2
PROTECTION MODULE 24V, 4 OUTPUTS
21. APPROVALS
EC Declaration of
Conformity
IEC 60950-1
2^nd Edition
UL 508
UL 60950-1
2^nd Edition
NEC Class 2
UL 2367
ANSI / ISA 12.12.01-
2007
(Class I Div 2)
EN 60079-15
ATEX
Marine
GOST R
IND. CONT. EQ.
NEC CLASS 2
The CE mark indicates conformance with the:
- EMC directive 2004/108/EC,
- Low-voltage directive (LVD) 2006/95/EC,
- RoHS directive 2011/65/EU and the
- ATEX directive 94/9/EC
CB Scheme,
Safety of Information Technology Equipment
Listed for the use as Industrial Control Equipment;
U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);
E-File: E198865
Recognized for the use as Information Technology Equipment, Level
5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950);
E-File: E137006
Recognized as Limited Power Source (LPS) according to UL 60950-1.
Also meet the requirements of NEC CLASS 2 according to UL1310.
Special-purpose Solid-State Overcurrent Protector
Component Recognition; UL Category QVRQ2
E-File: E342020
LISTED for use in Hazardous Location Class I Div 2 T4 Groups A,B,C,D
systems; NRTL/C (Canada and U.S.)
II 3G EX nA nC IIC T4 Gc
Approval for use in hazardous locations Zone 2 Category 3G.
Number of ATEX certificate: EPS 11 ATEX 1 327 X
Evaluated according to EN 60079-0 and EN 60079-15
GL (Germanischer Lloyd) classified
Environmental category: C, EMC2
Marine and Offshore applications
Certificate of Conformity for Russia and other GUS countries
May 2014 / Rev. 1.7 DS-PISA11.CLASS2 - data sheet -
All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
17/19