PE33241 Datasheet, PDF (4/13 Pages) Peregrine Semiconductor – UltraCMOS Integer-N PLL Frequency Synthesizer for Low Phase Noise Applications

Table 2. Absolute Maximum Ratings
Symbol
Parameter/Condition
Min Max Unit
V_DD
Supply voltage
V_I
Voltage on any input
I_I
DC into any input
I_O
DC into any output
-0.3 3.3
V
-0.3
V_DD +
0.3
V
-10 +10 mA
-10 +10 mA
T_stg
Storage temperature range -65 150
°C
Table 3. Operating Ratings
Symbol
Parameter/Condition
V_DD
Supply voltage
T_A
Operating ambient
temperature range
Min Max Unit
2.65 2.95
V
-40 85
C
Moisture Sensitivity Level
The Moisture Sensitivity Level rating for the
PE33241 in the 48-lead 7x7 mm QFN package is
MSL3.
PE33241
Preliminary Specification
Table 4. ESD Ratings
Symbol
Parameter/Condition
Level Unit
V_ESD ESD voltage (Human Body Model)¹ 1000
V
Note 1: Periodically sampled, not 100% tested. Tested per MIL-STD-883,
M3015 C2
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS^® device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the rating specified.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS^®
devices are immune to latch-up.
Table 5. DC Characteristics: V_DD = 2.65 to 2.95V, -40°C < T_A < 85°C, unless otherwise specified
Symbol
Parameter
Condition
Min
Typ
Max
Unit
Operational supply current
Pre_5/6_Sel = “low”
I_DD
Prescaler disabled
Fc = 50 MHz, Fin = 500 MHz
40
mA
Prescaler enabled
Fc = 50 MHz, Fin = 3 GHz
80
mA
Digital Inputs: All except f_r, F_in, Fi͞ n
V_IH
High level input voltage
V_IL
Low level input voltage
I_IH
High level input current
I_IL
Low level input current
Reference Divider input: f_r
I_IHR
High level input current
I_ILR
Low level input current
Counter and phase detector outputs: PD_D , PD_U
V_OLD
Output voltage LOW
V_OHD
Output voltage HIGH
Lock detect outputs: Cext, LD
V_OLC
Output voltage LOW, Cext
V_OHC
Output voltage HIGH, Cext
V_OLLD
Output voltage LOW, LD
V_IH = V_DD = 2.95V
V_IL = 0, V_DD = 2.95V
V_IH = V_DD = 2.95V
V_IL = 0, V_DD = 2.95V
I_out = 6 mA
I_out = -3 mA
I_out = 100 μA
I_out = -100 μA
I_out = 1 mA
0.7 x V_DD
-1
-100
V_DD - 0.4
V_DD - 0.4
V
0.3 x V_DD
V
70
μA
μA
100
μA
μA
0.4
V
V
0.4
V
V
0.4
V
©2010-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 4 of 13
Document No. DOC-15014-3 │ UltraCMOS^® RFIC Solutions