PS219B2-AS Datasheet, PDF (7/11 Pages) Powerex Power Semiconductors – Dual-In-Line Intelligent Power Module 5 Amperes/600 Volts

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697-1800 [phone] www.pwrx.com
PS219B2-S, PS219B2-AS, PS219B2-CS
Intellimod™ Module
Dual-In-Line Intelligent Power Module
5 Amperes/600 Volts
Mechanical Characteristics and Ratings
Characteristic
Symbol
Condition
Mounting Torque
M3 Mounting Screws^*8
Terminal Pulling Strength
Control Terminal: Weight 4.9N

Power Terminal: Weight 9.8N
Terminal Bending Strength
Control Terminal: Weight 2.45N

Power Terminal: Weight 4.9N

90 Degree Bend
Module Weight (Typical)
Heatsink Flatness^*9
Min.
Typ. Max. Units
5.2
6.1
6.9
in-lb
10
—
—
s
2
—
—
times
—
8.5
— Grams
-50
—
+100
µm
Recommended Conditions for Use
Characteristic
Symbol
Condition
Min.
Typ.
Max.
Supply Voltage
V_CC
Applied between P-N Terminals
0
300
400
Control Supply Voltage
V_D
Applied between V_P1-V_NC, V_N1-V_NC
13.5 15.0 16.5
V_DB
Applied between V_UFB-U,
13.0 15.0 18.5
V_VFB-V, V_WFB-W
Control Supply Variation
∆V_D, ∆V_DB
-1
—
1
Arm Shoot-through Blocking Time
t_DEAD
For Each Input Signal, T_C ≤ 100°C
1.0
—
—
Allowable Minimum Input
P_WIN(on) 0.7
—
—
Pulse Width^*11
P_WIN(off)
0.7
—
—
V_NC Voltage Variation
V_NC
Between V_NC-NU, NV, NW (Including Surge) -5.0
—
5.0
Junction Temperature
T_j
-20 125
*8 Plain washers (ISO 7089-7094) are recommended.
*9 Flatness measurement position.
Units
Volts
Volts
Volts
V/µs
µs
µs
µs
Volts
°C
MEASUREMENT POSITION
+–
4.6mm
17.5mm
HEATSINK
–
+
HEATSINK
*11 DIPIPM may not respond if the input signal pulse is less than P_WIN(on), P_WIN(off).
12/11 Rev. 0
7