PS219B2-AS Datasheet, PDF (6/11 Pages) Powerex Power Semiconductors – Dual-In-Line Intelligent Power Module 5 Amperes/600 Volts

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697-1800 [phone] www.pwrx.com
PS219B2-S, PS219B2-AS, PS219B2-CS
Intellimod™ Module
Dual-In-Line Intelligent Power Module
5 Amperes/600 Volts
*6 The DIPIPM does not automatically shutdown the IGBTs and fault signal when temperature rises excessively. When the temperature exceeds the protective level that is defined by the
user, the controller (MCU) should stop the DIPIPM. The temperature of LVIC vs. VOT output characteristics is shown in the following graph. VOT output may exceed 3.3V when the
temperature rises excessively, therefore, it is recommended for protection of the control part (MCU) to insert a clamp diode between the control supply (3.3V) and VOT output.
LVIC TEMPERATURE VS. TEMPERATURE OUTPUT
CHARACTERISTICS
4.00
3.50
3.15
3.00
2.77
2.50
2.40
2.00
106±6°C
90±5°C
75±6°C
1.50
60
70 80 90 100 110 120
LVIC TEMPERATURE, (°C)
*7 Bootstrap Diode (@Ta = 25°C) Characteristics
FORWARD VOLTAGE-FORWARD CURRENT
CURVE FOR BOOTSTRAP
160
140
120
100
80
60
40
20
0
0 1 2 3 4 5 6 7 8 9 101112131415
FORWARD VOLTAGE, V_F, (VOLTS)
DIODE FORWARD VOLTAGE-FORWARD
CURRENT CURVE FOR BOOTSTRAP DIODE
(MAGNIFIED VIEW)
30
25
20
15
10
5
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
FORWARD VOLTAGE, V_F, (VOLTS)
6
12/11 Rev. 0