|
TDA4858 Datasheet, PDF (2/44 Pages) NXP Semiconductors – Economy Autosync Deflection Controller (EASDC) | |||
|
◁ |
Philips Semiconductors
Economy Autosync Deï¬ection Controller
(EASDC)
Product speciï¬cation
TDA4858
FEATURES
Concept features
⢠Full Horizontal (H) plus Vertical (V) autosync capability
⢠Completely DC controllable for analog and digital
concepts
⢠Excellent geometry control functions [e.g. automatic
correction of East-West (EW) parabola during
adjustment of vertical size and vertical shift]
⢠Flexible Switched Mode Power Supply (SMPS) function
block for feedback and feed forward converters
⢠X-ray protection
⢠Start-up and switch-off sequence for safe operation of
all power components
⢠Very good vertical linearity
⢠Internal supply voltage stabilization
⢠SDIP32 package.
Synchronization inputs
⢠Can handle all sync signals (horizontal, vertical,
composite and sync-on-video)
⢠Combined output for video clamping, vertical blanking
and protection blanking
⢠Start of video clamping pulses externally selectable.
Horizontal section
⢠Extremely low jitter
⢠Frequency locked loop for smooth catching of line
frequency
⢠Simple frequency preset of fmin and fmax by external
resistors
⢠DC controllable wide range linear picture position
⢠Soft start for horizontal driver.
Vertical section
⢠Vertical amplitude independent of frequency
⢠DC controllable picture height, picture position and
S-correction
⢠Differential current outputs for DC coupling to vertical
booster.
EW section
⢠Output for DC adjustable EW parabola
⢠DC controllable picture width and trapezium correction
⢠Optional tracking of EW parabola with line frequency
⢠Prepared for additional DC controls of vertical linearity,
EW-corner, EW pin balance, EW parallelogram, vertical
focus by extended application.
GENERAL DESCRIPTION
The TDA4858 is a high performance and efficient solution
for autosync monitors. The concept is fully DC controllable
and can be used in applications with a microcontroller and
stand-alone in rock bottom solutions.
The TDA4858 provides synchronization processing, H + V
synchronization with full autosync capability, and very
short settling times after mode changes. External power
components are given a great deal of protection. The IC
generates the drive waveforms for DC-coupled vertical
boosters such as TDA486x and TDA8351.
The TDA4858 provides extended functions e.g. as a
flexible SMPS block and an extensive set of geometry
control facilities, providing excellent picture quality.
Together with the Philips TDA488x video processor family
a very advanced system solution is offered.
ORDERING INFORMATION
TYPE
NUMBER
TDA4858
NAME
SDIP32
PACKAGE
DESCRIPTION
plastic shrink dual in-line package; 32 leads (400 mil)
VERSION
SOT232-1
1997 Oct 27
2
|
▷ |