74F821 Datasheet, PDF (2/18 Pages) NXP Semiconductors – Bus interface registers

Philips Semiconductors
Bus interface registers
Product specification
74F821/822/823/824/825/826
74F821
74F822
74F823
74F824
74F825
74F826
10-bit bus interface register, non-inverting (3-State)
10-bit bus interface register, inverting (3-State)
9-bit bus interface register, non-inverting (3-State)
9-bit bus interface register, inverting (3-State)
8-bit bus interface register, non-inverting (3-State)
8-bit bus interface register, inverting (3-State)
FEATURES
• High speed parallel registers with positive edge-triggered D-type
flip-flops
• High performance bus interface buffering for wide data/address
paths or busses carrying parity
• High impedance PNP base inputs for reduced loading (20µA in
high and low states)
• I_IL is 20µA vs 1000µA for AM29821 series
• Buffered control inputs to reduce AC effects
• Ideal where high speed, light loading, or increased fan-in as
required with MOS microprocessor
• Positive and negative over-shoots are clamped to ground
• 3-State outputs glitch free during power-up and power-down
• Slim Dip 300 mil package
• Broadside pinout compatible with AMD AM 29821-29826 series
• Outputs sink 64mA and source 24mA
• Industrial temperature range available (–40°C to +85°C) for
74F823
DESCRIPTION
The 74F821 series bus interface registers are designed to
eliminate the extra packages required to buffer existing registers and
provide extra data width for wider data/address paths of busses
carrying parity.
The 74F821/74F822 are buffered 10-bit wide versions of the popular
74F374/74F534 functions.
The 74F822 is the inverted output version of 74F821.
The 74F823 and 74F824 are 9-bit wide buffered registers with clock
enable (CE) and master reset (MR) which are ideal for parity bus
interfacing in high microprogrammed systems.
The 74F824 is the inverted version of 74F823.
The 74F825 and 74F826 are 8-bit buffered registers with all the
74F823/74F824 controls plus output enable (OE0, OE1, OE2) to
allow multiuser control of the interface, e.g., CS, DMA, and RD/WR.
They are ideal for uses as an output port requiring high I_OL/I_OH.
The 74F826 is the inverted version of 74F825.
TYPE
74F821, 74F822
74F823, 74F824
74F825, 74F826
TYPICAL
f_max
180MHz
180MHz
180MHz
TYPICAL
SUPPLY CURRENT
(TOTAL)
75mA
70mA
65mA
ORDERING INFORMATION
DESCRIPTION
24-pin plastic slim DIP (300mil)
24-pin plastic SOL
ORDER CODE
COMMERCIAL RANGE
V_CC = 5V ±10%,
T_amb = 0°C to +70°C
N74F821N, N74F822N, N74F823N,
N74F824N, N74F825N, N74F826N
INDUSTRIAL RANGE
V_CC = 5V ±10%,
T_amb = –40°C to +85°C
I74F823N
N74F821D, N74F822D, N74F823D,
N74F824D, N74F825D, N74F826D
I74F823D
PKG. DWG. #
SOT222-1
SOT137-1
1996 Jan 05
2
853-1304 16195