80CL410 Datasheet, PDF (16/28 Pages) NXP Semiconductors – Low voltage/low power single-chip 8-bit microcontroller with I2C

Philips Semiconductors
Low voltage/low power single-chip
8-bit microcontroller with I²C
Product specification
80CL410/83CL410
V_CC
+
10µF
V_CC
8XCL410
RST
R_RST
Figure 9. Recommended Power-on Reset Circuitry
ABSOLUTE MAXIMUM RATINGS^{1, 2, 3}
PARAMETER
RATING
UNIT
Supply voltage
–0.5 to +6.5
V
All input voltages
DC current into any input or output
–0.5 to V_DD +0.5
V
5
mA
Total power dissipation
300
mW
Storage temperature range
–65 to +150
°C
Operating ambient temperature range
–40 to +85
°C
Operating junction temperature
125
°C
NOTES:
1. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any conditions other than those described in the AC and DC Electrical Characteristics section
of this specification is not implied.
2. This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive static
charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maxima.
3. Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V_SS unless otherwise
noted.
1995 Jan 20
16