SAB9076H Datasheet, PDF(15/32 Page) NXP Semiconductors – Picture-In-Picture PIP controller

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SAB9076H Datasheet, PDF (15/32 Pages) NXP Semiconductors – Picture-In-Picture PIP controller

◁

Philips Semiconductors

Picture-In-Picture (PIP) controller

Preliminary speciï¬cation

SAB9076H

I2C-bus description

The I2C-bus provides bi-directional 2-line communication

between different ICs. The SDA line is the serial data line

and SCL serves as serial clock line. Both lines must be

connected to a positive supply via a pull-up resistor when

connected to the output stages of a device. Data transfer

may be initiated only when the bus is not busy.

The SAB9076H has the I2C-bus addresses 2C and 2E,

switchable by the pin A0. Valid Sub-Addresses (SA) are

00H to 18H (Table 4) and 20H to 32H (Table 6).

I2C-bus control is in accordance with the I2C-bus protocol.

First a START sequence must be put on the I2C-bus, then

the I2C-bus address of the circuit must be send, followed

by a subaddress. After this sequence the data of the

subaddresses must be sent. An auto-increment function

gives the option to send data of the incremented

subaddresses until a STOP sequence is send. Table 4

gives an overview of the I2C-bus addresses.

Table 4 Overview of I2C-bus sub-addresses

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH

0BH

0CH

0DH

0EH

0FH

10H

11H

12H

13H

14H

15H

16H

17H

18H

DATA BYTE

BIT 7

BIT 6

BIT 5

BIT 4

BIT 3

BIT 2

BIT 1

BIT 0

MPIPON SPIPON MFREEZE SFREEZE PIPMODE3 PIPMODE2 PIPMODE1 PIPMODE0

note 1

M1FLD

S1FLD

note 1

DNONINT MNONINT SNONINT

DFILT

FILLOFF SMART6 SKIP6

YTH3

YTH2

YTH1

YTH0

BGHFP3 BGHFP2 BGHFP1 BGHFP0 BGVFP3 BGVFP2 BGVFP1 BGVFP0

SDHFP7 SDHFP6 SDHFP5 SDHFP4 SDHFP3 SDHFP2 SDHFP1 SDHFP0

SDVFP7 SDVFP6 SDVFP5 SDVFP4 SDVFP3 SDVFP2 SDVFP1 SDVFP0

MDHFP7 MDHFP6 MDHFP5 MDHFP4 MDHFP3 MDHFP2 MDHFP1 MDHFP0

MDVFP7 MDVFP6 MDVFP5 MDVFP4 MDVFP3 MDVFP2 MDVFP1 MDVFP0

MDREDH1 MDREDH0 MDREDV1 MDREDV0 SDREDH1 SDREDH0 SDREDV1 SDREDV0

MAREDH1 MAREDH0 MAREDV1 MAREDV0 SAREDH1 SAREDH0 SAREDV1 SAREDV0

MAHFP3 MAHFP2 MAHFP1 MAHFP0 SAHFP3 SAHFP2 SAHFP1 SAHFP0

SAVFP7 SAVFP6 SAVFP5 SAVFP4 SAVFP3 SAVFP2 SAVFP1 SAVFP0

MAVFP7 MAVFP6 MAVFP5 MAVFP4 MAVFP3 MAVFP2 MAVFP1 MAVFP0

MLSEL3 MLSEL2 MLSEL1 MLSEL0 SLSEL3 SLSEL2 SLSEL1 SLSEL0

MBSEL3 MBSEL2 MBSEL1 MBSEL0 SBSEL3 SBSEL2 SBSEL1 SBSEL0

BHSIZE3 BHSIZE2 BHSIZE1 BHSIZE0 BVSIZE3 BVSIZE2 BVSIZE1 BVSIZE0

note 1

SBON

SBBRT1 SBBRT0 note 1

SBCOL2 SBCOL1 SBCOL0

note 1

SBSON SBSBRT1 SBSBRT0 note 1

SBSCOL2 SBSCOL1 SBSCOL0

note 1

MBON

MBBRT1 MBBRT0 note 1

MBCOL2 MBCOL1 MBCOL0

note 1

MBSON MBSBRT1 MBSBRT0 note 1

MBSCOL2 MBSCOL1 MBSCOL0

note 1

BGON

BGBRT1 BGBRT0 note 1

SBGCOL2 SBGCOL1 SBGCOL0

note 1

SVFILT

SUVPOL SVSPOL SHSYNC SFPOL

note 1

MVFILT MUVPOL MVSPOL MHSYNC MFPOL

note 1

FBDEL2 FBDEL1 FBDEL0 DUVPOL DVSPOL DHSYNC DFPOL

PEDESTV3 PEDESTV2 PEDESTV1 PEDESTV0 PEDESTU3 PEDESTU2 PEDESTU1 PEDESTU0

Note

1. The data bits which are not used should be set to zero.

1996 Aug 13

▷