|
TDA8922B Datasheet, PDF (1/32 Pages) NXP Semiconductors – 2 X 50 W class-D power amplifier | |||
|
TDA8922B
2 à 50 W class-D power ampliï¬er
Rev. 01 â 1 October 2004
Preliminary data sheet
1. General description
The TDA8922B is a high efï¬ciency class-D audio power ampliï¬er with very low
dissipation. The typical output power is 2 Ã 50 W.
The device is available in the HSOP24 power package and in the DBS23P through-hole
power package. The ampliï¬er operates over a wide supply voltage range from ±12.5 V
to ±30 V and consumes a very low quiescent current.
2. Features
s Zero dead time switching
s Advanced current protection: output current limiting
s Smooth start-up: no pop-noise due to DC offset
s High efï¬ciency
s Operating supply voltage from ±12.5 V to ±30 V
s Low quiescent current
s Usable as a stereo Single-Ended (SE) ampliï¬er or as a mono ampliï¬er in Bridge-Tied
Load (BTL)
s Fixed gain of 30 dB in Single-Ended (SE) and 36 dB in Bridge-Tied Load (BTL)
s High supply voltage ripple rejection
s Internal switching frequency can be overruled by an external clock
s Full short-circuit proof across load and to supply lines
s Thermally protected.
3. Applications
s Television sets
s Home-sound sets
s Multimedia systems
s All mains fed audio systems
s Car audio (boosters).
|
▷ |