MN101EFA6 Datasheet, PDF (6/33 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EFA6/A5/A1/A0 Series
8-bit Single-chip Microcontroller
PubNo. 216A6-012E
Timer 0 to 2 or Timer A divided by 1, 2, 4, 8, 16, External clock
- MSB/LSB can be selected as the first bit to be transferred,
arbitrary sizes of 1 to 8 bits are selectable.
- Sequence transmission, reception or both are available.
Multi master IIC
- 7-bit slave address is settable.
- General call communication mode is supported.
- Automatic Reset:
Power detection level: 4.3 V (at rising), 4.2 V (at falling)
- LED Driver: 16 pins (Port 0 or Port A)
- Touch Sensor TImer: 1 unit/ 8 channels (MN101EFA1/A0 don't have this function)
- Ports (MN101EFA6/A1)
I/O ports
Serial Interface pins
Timer I/O
Buzzer output pins
A/D input pins
External Interrupt pins
LED (large current) driver
Touch sensor input pins
Touch sensor resistor connect pins
High-speed oscillation
36 pins
12 pins
15 pins
2 pins
12 pins
6 pins
16 pins (Port 0 or Port A)
8 pins (MN101EFA1 does not have this function)
2 pins (MN101EFA1 does not have this function)
2 pins
Special pins
Operation mode input pins
Reset input pin
Analog reference voltage input pin
Power pins
- Ports (MN101EFA5/A0)
I/O ports
Serial Interface pins
Timer I/O
A/D input pins
External Interrupt pins
LED (large current) driver
Touch sensor input pins
Touch sensor resistor connect pins
High-speed oscillation
8 pins
3 pins
1 pin
1 pin
3 pins
24 pins
9 pins
9 pins
8 pins
5 pins
16 pins (Port 0 or Port A)
8 pins (MN101EFA0 does not have this function)
2 pins (MN101EFA0 does not have this function)
2 pins
Special pins
Operation mode input pins
Reset input pin
Analog reference voltage input pin
8 pins
3 pins
1 pin
1 pin
Publication date: November 2014