MN101EFA6 Datasheet, PDF (26/33 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EFA6/A5/A1/A0 Series
8-bit Single-chip Microcontroller
PubNo. 216A6-012E
V_DD5 = 4.0 V to 5.5 V V_SS = 0 V
Ta = -40 C to +85 C
Parameter
Symbol
Conditions
Rating
Unit
MIN
TYP
MAX
I/O pin 5 P22 to P24, P25 to P26 *10 P30 to P31, P32 to P36
C29 Input high voltage
V_IH5
C30 Input low voltage
V_IL5
0.8 V_DD5
0
V_DD5
V
0.2 V_DD5
C31 Input leakage current I_LK4 V_IN=0 V to V_DD5
±2
A
C32 Pull-up resistor
R_RH4
V_DD5=5.0 V, V_IN=V_SS
Pull-up resistor ON
10
50
100
k
C33 Output high voltage
V_OH3 V_DD5=5.0 V, I_OH=-0.5 mA
4.5
C34 Output low voltage
V_OL4 V_DD5=5.0 V, I_OL=1.0 mA
V
0.5
I/O pin 6 PA0 to PA7
C35 Input high voltage
V_IH6
C36 Input low voltage
V_IL6
0.8 V_DD5
0
V_DD5
V
0.2 V_DD5
C37 Input leakage current I_LK5 V_IN=0 V to V_DD5
±2
A
C38 Pull-up resistor
R_RH5
V_DD5=5.0 V, V_IN=V_SS
Pull-up resistor ON
10
50
100
k
C39 Output high voltage
V_OH4 V_DD5=5.0 V, I_OH=-0.5 mA
4.5
C40 Output low voltage 1
V_OL5
V_DD5=5.0 V, I_OL=1.0 mA
LED output OFF
0.5
V
C41 Output low voltage 2
V_OL6
V_DD5=5.0 V, I_OL=15.0 mA
LED output ON
1.0
I/O pin 7 P40 to P45
C42 Input high voltage
V_IH7
C43 Input low voltage
V_IL7
0.8 V_DD5
0
V_DD5
V
0.2 V_DD5
C44 Input leakage current I_LK5 V_IN=0 V to V_DD5
±2
A
C45 Pull-up resistor
C46 Pull-down resistor
R_RH6
R_RL1
V_DD5=5.0 V, V_IN=V_SS
Pull-up resistor ON
V_DD5=5.0 V, V_IN=V_DD5
Pull-down resistor ON
10
50
100
k
10
50
100
C47 Output high voltage
V_OH5 V_DD5=5.0 V, I_OH=-0.5 mA
4.5
C48 Output low voltage
V_OL7 V_DD5=5.0 V, I_OL=1.0 mA
V
0.5
Input pin 8 DMOD *11
C49 Input high voltage
V_IH8
C50 Input low voltage
V_IL8
0.8 V_DD5
0
V_DD5
V
0.2 V_DD5
C51 Pull-up resistor
R_RH8
V_DD5=5.0 V, V_IN=V_SS
Pull-up resistor ON
10
50
100
k
*10 These are not used for oscillation pins.
*11 Only flash EEPROM version, DMOD pin contains an internal pull-up resistor.
When using In-Circuit Emulator, connect pull-up resistor to DMOD on the target board.
Publication date: November 2014