LC88FC2F0B Datasheet, PDF (34/47 Pages) ON Semiconductor – 16-bit Microcontroller 384K-byte Flash ROM / 24Kbyte RAM / 100-pin

LC88FC2F0B
7. UART0 Operating Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Symbol
Applicable
Pin/Remarks
Conditions
VDD [V] min
Transfer rate
UBR0
U0RX (P13),
U0TX (P14),
U0BRG
2.7 to 3.6
4
(P07)
Note 4-9: tBGCYC denotes one cycle of the baudrate clock source.
Specification
typ
max
8
unit
tBGCYC
8. UART2 Operating Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Transfer rate
Symbol
UBR2
Applicable
Pin/Remarks
U2RX (P16),
U2TX (P17),
Conditions
VDD [V] min
Specification
typ
max
2.7 to 3.6
8
4096
unit
tBGCYC
Note 4-10: tBGCYC denotes one cycle of the baudrate clock source.
9. UART3 Operating Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Transfer rate
Symbol
UBR3
Applicable
Pin/Remarks
U3RX (P34),
U3TX (P35),
Conditions
VDD [V] min
Specification
typ
max
2.7 to 3.6
8
4096
unit
tBGCYC
Note 4-10: tBGCYC denotes one cycle of the baudrate clock source.
■ Pulse Input Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Symbol Applicable Pin/Remarks
Conditions
VDD [V] min
High/low level tPIH (1) INT0 (P30),
 _{Interrupt source flag can be}
pulse width
tPIL (1) INT1 (P31),
set.
INT2 (P32),
 _{Event inputs for timers 2 and}
INT3 (P33),
INT4 (P20),
3 are enabled.
2.7 to 3.6 2
INT5 (P21),
INT6 (P40),
INT7 (P41)
tPIL (2) RESB
Resetting is enabled.
2.7 to 3.6 10
Specification
typ max unit
tCYC
s
www.onsemi.com
34