82V3001A Datasheet, PDF (19/28 Pages) Integrated Device Technology – WAN PLL WITH SINGLE REFERENCE INPUT

IDT82V3001A
5
TEST SPECIFICATIONS
WAN PLL WITH SINGLE REFERENCE INPUT
Table - 4 Absolute Maximum Ratings^**
Rating
Power Supply Voltage
Voltage on Any Pin with Respect to Ground
Package Power Dissipation
Storage Temperature
Min.
Max.
Unit
-0.5
5.0
V
-0.5
V_DDD + 0.5
V
200
mW
-55
125
°C
Note:
Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods
may affect reliability.
Table - 5 Recommended DC Operating Conditions^**
Parameter
Min.
Typ.
Max.
Unit
Operating Temperature
-40
+85
°C
Power Supply Voltage
3.0
3.6
V
Table - 6 DC Electrical Characteristics^**
Parameter
Description
I_DDS Supply current with OSCi = 0 V
I_DD Supply current with OSCi = Clock
V_CIH CMOS high-level input voltage
V_CIL CMOS low-level input voltage
V_TIH TTL high-level input voltage
V_TIL TTL low-level input voltage
Input leakage current:
Normal (low level)
Normal (high level)
I_IL
Pull up (low level)
Pull up (high level)
Pull down (low level)
Pull down (high level)
V_OH High-level output voltage
V_OL Low-level output voltage
Min
Typ.
Max
Units
Test Conditions
10
mA Outputs unloaded
60
mA Outputs unloaded
0.7V_DDD
2.0
0.3V_DDD
V OSCi, Fref
V OSCi, Fref
V All input pins except for OSCi and Fref
0.8
V All input pins except for OSCi and Fref
-15
15
-15
15
-100
0
µA V_I = V_DDD or 0 V
-15
15
-15
15
0
100
2.4
V I_OH = 8 mA
0.4
V I_OL = 8 mA
TEST SPECIFICATIONS
19
November 14, 2012