S8JXG05012CD Datasheet, PDF (8/59 Pages) Omron Electronics LLC – Switch Mode Power Supply

S8JX
Input specification
100/200 V (Selected)
Item
Power ratings *1
300 W
600 W
5V models
71% min.
72% min.
Efficiency
12V models
24V models
75% min.
82% min.
78% min.
80% min.
48V models
82% min.
80% min.
Voltage *2
100 to 120 VAC (allowable range: 85 to 132 VAC)
200 to 240 VAC (allowable range: 170 to 264 VAC)
(Switchable)
Frequency *2
50/60 Hz (47 to 450 Hz)
Input
Current *3
Power factor
100 V input
200 V input
8 A max.
4.5 A max.
16 A max.(5V, 12V, 48V)
14 A max.(24V)
9 A max.(5V, 12V, 48V)
8 A max.(24V)
---
Harmonic current emissions
---
Leakage current *3
100 V input
200 V input
0.5 mA max.
1 mA max.
Inrush current (for a ^{100 V input}
cold start at 25°C) *3 _{200 V input}
25 A max.
50 A max.
30 A max.
60 A max.
Noise filter
Yes
Voltage adjustment range *5
−10% to 15% (with V. ADJ) (48-V models: ±10%)
Ripple *3
2.8% (p-p) max.(5V) *6
2% (p-p) max.(12V, 24V, 48V)
3.8% (p-p) max.(5V) *6
2% (p-p) max.(12V) *6
2% (p-p) max.(24V, 48V)
Output *4 ^{Input variation influence}
Load variation influence
0.4% max.
0.8% max. (0 to 100% load, rated input voltage)
Temperature variation influence
0.05%/°C max.
Startup time
650 ms max.
500 ms max.
Hold time *3
20 ms min.
Overload protection *7
105% to 175%
of rated load current, Inverted L voltage drop,
the circuit will be shut OFF when the
overload exceeds 5 s.(5V, 12V) *10
voltage drop, intermittent, automatic reset.
(24V, 48V)
105% to 175% of rated load current, Inverted
L voltage drop, the circuit will be shut OFF
when the overload exceeds 5 s. *10
Additional Overvoltage protection *8
functions
Overheat protection
Yes (5V, 12V) *10
Yes (24V, 48V) *10
Yes (5V, 12V) *10
N0 (24V, 48V) *10
Yes *10
Yes *10
Parallel operation
Yes (up to 5 units)
Series operation
Yes (For up to two Power Supplies; external diodes required.)
Protective circuit operation indicator
Yes (color: red) (5V, 12V)
No (24V, 48V)
Yes (color: red)
Ambient operating temperature
Refer to the derating curve in Engineering Data on page 16 (with no icing or condensation).
Storage temperature
−25 to 65°C (with no icing or condensation)
Ambient operating humidity
25% to 85% (Storage humidity: 25% to 90%)
Dielectric strength
3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 25 mA)
2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 25 mA)
1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 25 mA)
Insulation resistance
100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
Vibration resistance
10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance
150 m/s², 3 times each in ±X, ±Y, ±Z directions
Output indicator
Yes (Color: Green)
EMI
Other
Conducted Emissions *3
Radiated Emissions
Electrostatic Discharge
Conforms to EN 55011 Group 1 Class A and based on FCC Class A *11
Conforms to EN 55011 Group 1 Class A *11 *12
Conforms to EN61000-4-2
Radiated Electromagnetic Field Conforms to EN61000-4-3
EMS
Electrical Fast Transient/Burst
Surge
Conforms to EN61000-4-4
Conforms to EN61000-4-5
Conducted Disturbance
Conforms to EN61000-4-6
Voltage Dips/Short Interruptions Conforms to EN61000-4-11
UL UR: UL 508 (Recognition), UL 60950-1 (Recognition)
Approved standards *13
cUR: CSA C22.2 No. 60950-1
EN/VDE: EN50178 (= VDE 0160), Over voltage category III, EN 60950-1 (= VDE 0805 Teil 1)
(Terminal block: Based on DIN 50274 (VDE 0660-514))
Weight *9
1,800 g max. (5V, 12V)
1,600 g max. (24V, 48V)
2,500 g max.
8