S8JXG05012CD Datasheet, PDF (43/59 Pages) Omron Electronics LLC – Switch Mode Power Supply

S8JX
Mounting
50-/100-/150-W Models
The following three mounting methods are possible.
. Front-mounting: Refer to Mounting Bracket Provided with Front-mounting Power
Supplies on page 52.
B
. Bottom-mounting
. Side-mounting
Note: Additional mounting methods are also available using DIN Rail-mounting
models.
C
Standard Mounting
50-/100-/150-W Models
Front-mounting
DIN Rail-mounting
Bottom-mounting
Vertical Side-mounting
Horizontal Side-mounting
*
*
*
*
Note: 1. Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or damage of internal parts. Use the
standard mounting method only.
2. When mounting the Power Supply, mounting it to a metal plate (*) is recommended.
3. Install the Power Supply so that the air flow circulates around the Power Supply, as the Power Supply is designed to radiate heat by
means of natural air flow.
300-/600-W Models
Front-mounting
Bottom-mounting
Side-mounting
300W ^∗
600W ^∗
300W ^∗
600W ^∗
300W
600W
Note: 1. Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or damage of internal parts. Use the
standard mounting method only.
2. When mounting the Power Supply, mounting it to a metal plate (*) is recommended.
3. Do not cover the air holes (provided at fan mounted side and the opposite side) to have enough air-cooling.
43