S8JXG05012CD Datasheet, PDF (37/59 Pages) Omron Electronics LLC – Switch Mode Power Supply

S8JX
Input specification
100 to 240 V input
Item
Power ratings *1
300 W
600 W
Efficiency
24V models
79% min.
78% min.
Voltage *2
100 to 240 VAC (allowable range: 85 to 264 VAC)
80 to 370 VDC *8
Frequency *2
50/60 Hz (47 to 63 Hz)
Current *3
100 V input
200 V input
4.5 A max.
2.2 A max.
8.7 A max.
4.3 A max.
Input
Power factor
Harmonic current emissions
0.9 min.
Conforms to EN61000-3-2
Leakage current *3
100 V input
200 V input
0.5 mA max.
1 mA max.
Inrush current (for a ^{100 V input}
cold start at 25°C) *3 _{200 V input}
17.5 A max.
35 A max.
Noise filter
Yes
Voltage adjustment range *5
−10% to 15% (with V. ADJ)
Ripple *3
2% (p-p) max.
Input variation influence
0.4% max.
Output *4 Load variation influence
0.8% max. (0 to 100% load, rated input voltage)
Temperature variation influence
0.05%/°C max.
Startup time
1,000 ms max.
Hold time *3
20 ms min.
Overload protection *6
105% to 160% of rated load current, voltage drop, intermittent, automatic reset.
Overvoltage protection *7
Yes
Additional ^{Overheat protection}
functions _{Parallel operation}
Yes
Yes (up to 5 Power Supplies)
Series operation
Yes (For up to two Power Supplies; external diodes required.)
Protective circuit operation indicator
Yes (color: red)
Ambient operating temperature
Refer to the derating curve in Engineering Data on page 42 (with no icing or condensation).
Storage temperature
−25 to 75°C (with no icing or condensation)
Ambient operating humidity
25% to 85% (Storage humidity: 25% to 90%)
Dielectric strength
3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 100 mA)
100 VAC for 1 min. (between all outputs and RC terminals; detection current: 100 mA)
500 VAC for 1 min. (between all outputs and ALM terminals; detection current: 20 mA)
Insulation resistance
100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
Vibration resistance
10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance
150 m/s², 3 times each in ±X, ±Y, ±Z directions *11
Output indicator
Yes (Color: Green)
EMI
Other
Conducted Emissions *3
Radiated Emissions
Electrostatic Discharge
Conforms to EN 55011 Group 1 Class B and based on FCC Class B *12
Conforms to EN 55011 Group 1 Class B *12
Conforms to EN61000-4-2
Radiated Electromagnetic Field Conforms to EN61000-4-3
EMS
Electrical Fast Transient/Burst
Surge
Conforms to EN61000-4-4
Conforms to EN61000-4-5
Conducted Disturbance
Conforms to EN61000-4-6
Voltage Dips/Short Interruptions Conforms to EN61000-4-11
UL UR: UL 508 (Recognition), UL 60950-1 (Recognition)
Approved standards *8
cUR: CSA C22.2 No.107.1, CSA C22.2 No. 60950-1
EN/VDE: EN50178 (= VDE 0160) Over voltage category III *9,
EN 60950-1 (= VDE 0805 Teil 1) *9
(Terminal block: Based on DIN 50274 (VDE 0660-514))
SEMI
SEMI F47-0706 (200-VAC input)
Weight
1,200 g max. *10
1,800 g max. *10
37