S8JXG05012CD Datasheet, PDF (19/59 Pages) Omron Electronics LLC – Switch Mode Power Supply

S8JX
Overload Protection
The Power Supply is provided with an overload protection function that protects the power supply from possible damage by overcurrent. When the
output current rises above 105% to 175% min. of the rated current, the protection function is triggered, decreasing the output voltage. When the
output current falls within the rated range, the overload protection function is automatically cleared.
Note: 1. When a load is connected that has a built-in DC-DC converter, the overload protection may operate at startup and the power supply may
not start.
2. Internal parts may occasionally deteriorate or be damaged if a short-circuited or overcurrent state continues during operation.
3. Internal parts may possibly deteriorate or be damaged if the Power Supply is used for applications with frequent inrush current or
overloading at the load end. Do not use the Power Supply for such applications.
(Reference value)
15-/35-/50-/100-/150-W (12-/24-/48-V) Models
300-W 5V, 12V/600-W Model
Intermittent operation
0
50
100
Load rate (%)
150-W, 5-V Models
Output interrupted
0
50
100
Load rate (%)
If an excessive current flows for 5 s or more, the output will be turned
OFF and simultaneously the protection-ON alarm indicator will be lit.
To reset the S8JX, turn OFF the power, leave the S8JX for at least
three minutes, and then turn it ON again.
0
50
100
Load rate (%)
300-W 24V, 48V Model
Intermittent operation
0
50
100
Load rate (%)
19