Y92S-27 Datasheet, PDF (31/61 Pages) Omron Electronics LLC – DIN 48 x 48-mm Multifunctional Timer Series

H3CR-F
Operation
■ Timing Chart
tON: ON set time
tOFF: OFF set time
Operating mode
Flicker OFF start
Timing chart
Rt
Power
ON
OFF
tOFF
tON
tOFF
tON
tOFF
tOFF
ONindicator ^Lit
Not lit
OFF indicator ^Lit
Not lit
Flicker ON start
Output NO
Output NC
ON
OFF
ON
OFF
Power
ON
OFF
ONindicator
Lit
Not lit
OFF indicator
Lit
Not lit
tON
tOFF
tON
tOFF
Rt
tON
tOFF
Output NO
ON
OFF
Output NC
ON
OFF
Note: 1. Allow a timer reset time (Rt) of 0.1 s or longer
2. When the setting dial is turned all the way past 0 for intantaneous output, "t" (set time) in the above time chart is 0-sec operation.
Nomenclature
Scale range display windows
changes as below by turning
the Time range selector clockwise.
0
0.2 0.4 0.6 0.8 1.0 1.2
0
0.5 1
1.5 2
2.5 3
0
2
4
6
8 10 12
0
5 10 15 20 25 30
OFF indicator (green)
Lit when the output is OFF.
ON indicator (orange)
Lit when the output is ON.
Scale range display
windows
Time range selector (select one
from 1.2, 3, 12, and 30 at full
scale)
For both ON-time and OFF-time.
OFF-time unit display window
OFF-time unit selector (select one from sec.
10 s, min., 10 min, hrs, and 10 h)
ON-time setting knob (with orange pointer)
For ON-time setting
OFF-time setting knob (with green pointer)
For OFF-time setting
ON-time unit display window
ON-time unit selector (select one
from sec, 10 s, min, 10 min, hrs, and
10 h)
31