Y92S-41-200 Datasheet, PDF(24/32 Page) Omron Electronics LLC – This Compact Cam Positioner, Popular for Its Ease-of-use, Now Comes with Even Better Functions.

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

Y92S-41-200 Datasheet, PDF (24/32 Pages) Omron Electronics LLC – This Compact Cam Positioner, Popular for Its Ease-of-use, Now Comes with Even Better Functions.

◁

Operation (Run Mode)

Starting Operation

â¢ Set the mode switch to RUN to start operation.

Mode

PRGM

TEST

RUN

Start input

indication

(See note.)

RUN

Present angular position

CAM

STEP

Speed (r/min)

Note: For 16/32-output models, be sure that the start input is ON

and that the start input indicator is lit. Outputs (including

the cam, pulse, and run outputs) will not function if the

start input is OFF. The 8-output models do not have a

start input.

Switching the Angle and Speed Displays

â¢ Press the ONâ âOFF Key for at least 1 s in Run Mode to reverse the

display positions of the present angular position and speed (r/min)

between main display and sub-display.

RUN

Present angular position on main display

Speed (r/min) on sub-display

Press the ONâ âOFF Key for 1 s min.

RUN

Speed (r/min) on main display

Present angular position on sub-display

H8PS

All Protection Function

The all protection function locks the H8PS in Run Mode and prohibits

any changes to settings. It can be used to prevent incorrect or

unauthorized operation. If the ADV Key is pressed for at least 5 s in

Run Mode, the All Protection indicator

will light on the display

and all keys and switches will be disabled. If the mode switch is

changed to Programming or Test Mode while protection is enabled,

the All Protection indicator

will flash to indicate that settings

cannot be changed. If a setting on the DIP switch is changed while

protection is enabled, the All Protection indicator

will flash when

the power supply is turned ON to indicate that settings cannot be

changed.

All Protection Function Disabled (Normal Operation)

456

RUN

CAM

STEP

Press the ADV Key for 5 s min.

All Protection Function Enabled

456

RUN

All protection indication

CAM

STEP

Checking ON/OFF Angle Settings

â¢ During Run Mode, the CAM Keys

and STEP Keys

can be used to check the ON/OFF angle settings for any step. Also,

the CHECK Key can be pressed to check the ON/OFF angle

settings in order for all steps starting from cam 1. If there is no key

operation for 10 s or longer during the checking operation, the

previous display will be resumed.

▷