MK82FN256VLL15 Datasheet, PDF (1/94 Pages) NXP Semiconductors – High performance ARM

Freescale Semiconductor, Inc.
Data Sheet: Technical Data
K82P121M150SF5
Rev. 1, 09/2015
Kinetis K82 Sub-Family
High performance ARM® Cortex®-M4F MCU with up to
256KB of Flash, 256KB of SRAM, Full Speed USB
connectivity, enhanced Security, and QuadSPI for
interfacing to Serial NOR flash
The K82 sub-family extends Kinetis products with new hardware
security mechanisms including decryption from serial NOR flash
memory, AES128, AES256 with side band attack protection, and
Elliptical Curve Cryptography acceleration. These advancements
are done while maintaining a high level of compatibility with
previous Kinetis devices. The MCUs range in total flash space
upto 256KB and have 256KB of SRAM. The QuadSPI interface
supports connections to Non-Volatile Memory for data or code.
The extended memory resources and new security features
allow developers to enhance their embedded applications with
greater capability.
MK82FN256VDC15
MK82FN256VLL15
MK82FN256VLQ15
MK82FN256CAx15
121 XFBGA (DC)
8 x 8 x 0.5 mm Pitch
0.65 mm
100 LQFP (LL)
14 x 14 x 1.7 Pitch
0.5mm
144 LQFP (LQ)
20 x 20 x 1.6 Pitch 0.5
mm
121 WLCSP (Ax)
4.64 mm x 4.53 mm
Performance
Analog modules
• Up to 150 MHz ARM Cortex-M4 based core with DSP
• One 16-bit SAR ADCs, two 6-bit DAC and one
instructions and Single Precision Floating Point unit
12-bit DAC
• Two analog comparators (CMP) containing a
Memories and memory expansion
6-bit DAC and programmable reference input
• Up to 256 KB program flash with 256 KB RAM
• Voltage reference 1.2V
• FlexBus external bus interface and SDRAM controller
• Dual QuadSPI with OTF decryption and XIP
Operating Characteristics
• 32 KB Boot ROM with built in bootloader
• Main VDD Voltage and Flash write voltage
• Supports SDR and DDR serial flash and octal configurations
range:1.71V–3.6 V
• Temperature range (ambient): -40 to 105°C
System and Clocks
• Multiple low-power modes
• Independent V_DDIO for PORTE (QuadSPI):
1.71V–3.6 V
• Memory protection unit with multi-master protection
• 3 to 32 MHz main crystal oscillator
Communication interfaces
• 32 kHz low power crystal oscillator
• USB full-/low-speed On-the-Go controller
• 48 MHz internal reference
• Secure Digital Host Controller (SDHC) and
FlexIO
Timers
• One I2S module, three SPI, four I2C modules
• One 4 ch-Periodic interrupt timer
and five LPUART modules
• Two 16-bit low-power timer PWM modules
• Two 8-ch motor control/general purpose/PWM timers
Security
• Two 2-ch quadrature decoder/general purpose timers
• LP Trusted Crypto (LTC) hardware
• Real-time clock with independent 3.3V power domain
accelerators supporting AES, DES, 3DES,
• Programmable delay block
RSA and ECC
• Hardware random-number generator
Human-machine interface
• Supports DES, AES, SHA accelerator (CAU)
• Low-power hardware touch sensor interface (TSI)
• Multiple levels of embedded flash security
• General-purpose input/output
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2015 Freescale Semiconductor,
Inc. All rights reserved.