ERB1885C2E100GDX5D Datasheet, PDF (10/20 Pages) Murata Manufacturing Co., Ltd. – Application Spec ifi c Capacitors High Frequency Ceramic Capacitors

A p p l i c at i o n S p e c i f i c Ca pa c i t o rs
High Frequency Ceramic Capacitors
Specifications and Test Methods
ERB Specifications and Test Methods
ERB Series
Item
Humidity Steady State
High Temperature Load
Specification
Appearance: No marking defects
Capacitance Change: Within ±5% or
±0.5 pF (Whichever is larger)
C30pF: Q > 350, 10pFC30pF:
Q>275+5°C/2C10pF:Q > 200+10C
C: Nominal Capacitance (puff)
Test Method
Apply the 24-hour heat (-10 to +65°C) and humidity
(80 to 100%) treatment, 10 consecutive times.
Appearance: No marking defects
Capacitance Change Within ±3% or
±0.3pF (Whichever is larger)
C30pFmin.>: Q 350
10pFC30pF: Q > 275+5C/2C
10pF: Q > 200+10C ɹɹ
C: Nominal Capacitance (pF)
Apply 200% (500V only 150%) of the rated voltage
for 1000±12 hours at the maximum operating
temperature ±3°C.
Table A-1
Char.
Nominal Values
(ppm/°C) Note
5C
0 ± 30
– 55C
Max .
0.58
Min.
-0.24
Capacitance Change from 25°Cʢ%ʣ
ʵ30C
Max.
Min.
0.4C
-0.17
Note: Nominal values denote the temperature coefficient within a range of 25°C to 125°C.
Max.
0.25
—10C
Min.
-0.11
C-29-C

www.murata.com

Innovator in Electronics – 53