English
Language : 

MT9VDDT6472HG Datasheet, PDF (9/18 Pages) Micron Technology – DDR SDRAM SODIMM
128MB, 256MB, 512MB (x72, ECC, SR) 200-Pin DDR SODIMM
Electrical Specifications
Electrical Specifications
Stresses greater than those listed in Table 8 may cause permanent damage to the
module. This is a stress rating only, and functional operation of the module at these or
any other conditions outside those indicated on the device data sheet is not implied.
Exposure to absolute maximum rating conditions for extended periods may adversely
affect reliability.
Table 8: Absolute Maximum Ratings
Symbol
VDD
VIN, VOUT
II
IOZ
TA
Parameter
VDD supply voltage relative to VSS
Voltage on any pin relative to VSS
Input leakage current; Any input 0V  VIN  VDD;
VREF input 0V  VIN 1.35V (All other pins not under
test = 0V)
Address inputs,
RAS#, CAS#, WE#, BA,
S#, CKE
CK, CK#
DM
Output leakage current; 0V  VOUT  VDDQ; DQ are
disabled
DRAM ambient operating temperature1
DQ, DQS
Commercial
Industrial
Min
–1.0
–0.5
–18
–6
–2
–5
0
–40
Max
3.6
3.2
18
Units
V
V
µA
6
2
5
µA
+70
°C
+85
°C
Notes: 1. For further information, refer to technical note TN-00-08: “Thermal Applications,” available
on Micron’s Web site.
Input Capacitance
Micron encourages designers to simulate the performance of the module to achieve
optimum values. Simulations are significantly more accurate and realistic than a gross
estimation of module capacitance when inductance and delay parameters associated
with trace lengths are used in simulations. JEDEC modules are currently designed using
simulations to close timing budgets.
Component AC Timing and Operating Conditions
Recommended AC operating conditions are given in the DDR component data sheets.
Component specifications are available on Micron’s Web site. Module speed grades
correlate with component speed grades, as shown in Table 9.
Table 9:
Module and Component Speed Grades
DDR components meet or exceed the listed module speed grades
Module Speed Grade
-40B
-335
-262
-26A
-265
Component Speed Grade
-5
-6
-75E
-75Z
-75
PDF: 09005aef80804052/Source: 09005aef806e057b
DD9C16_32_64x72H.fm - Rev. F 3/12 EN
9
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2004 Micron Technology, Inc. All rights reserved