DS51795A Datasheet, PDF (66/98 Pages) Microchip Technology – PICkit™ 3 Programmer/Debugger

PICkit™ 3 User’s Guide
10.6.2 Modular Cable and Connector
For standard communications, a modular cable connects the debugger and the target
application. The specifications for this cable and its connectors are listed below.
10.6.2.1 MODULAR CONNECTOR SPECIFICATION
• Manufacturer, Part Number – AMP Incorporated, 555165-1
• Distributor, Part Number – Digi-Key, A9031ND
The table within Figure 10-2 shows how the modular connector pins on an application
correspond to the microcontroller pins. This configuration provides full ICD
functionality.
FIGURE 10-2:
MODULAR CONNECTOR PINOUT OF TARGET BOARD
16
Modular
Connector Pin
6
5
4
3
2
1
Microcontroller
Pin
LVP
RB6
RB7
Ground
VDD Target
VPP
Front view of Modular Connector
on Target Board
6
1
Bottom view of Modular Connector
Pinout on Target Board
AC164110
Adapter
PICkit™ 3
Mini-USB
cable
to PC
Device-ICE
Header
Power
Transition Socket
Target Board
10.6.2.2 MODULAR PLUG SPECIFICATION
• Manufacturer, Part Number – AMP Incorporated, 5-554710-3
• Distributor, Part Number – Digi-Key, A9117ND
DS51795A-page 62
© 2009 Microchip Technology Inc.